EPCOSChambers
 |
|
|
| 5m ETSI Compliant Anechoic Chamber | View this data sheet in PDF format | |
 Features
|
Product Overview The TDK 5 meter test range ETSI semi anechoic chamber is designed to perform radiated emissions measurements at a 5 meter distance in accordance with ETSI standards. The chamber is also fully compliant with ANSI C63.4 & EN 50147-2 standards, and can be used to perform measurements according to CISPR standards. TDK IB-015 ferrite tiles and TDK IP-045C wedge-shaped, fully matched resistive absorbers are installed on the complete surface of walls and ceiling. White end caps complete the absorbers and greatly improve the illumination levels inside the chamber. NSA deviation is guaranteed within ±4 dB for a test volume of 3 m Ø, 2.5 m high. By positioning TDK ferrite tile floor plates and IP-045C absorbers between the transmit antenna and EUT (Equipment Under Test), the semi anechoic chamber can be used to perform free space radiated emissions measurements in compliance with ETSI standards in the frequency range from 30 MHz to 18 GHz and radiated immunity measurements in full compliance with IEC 1000-4-3 standards in the frequency range from 26 MHz to 18 GHz. The free space NSA is guaranteed within ±4dB for a test volume of 2 m Ø, 2 m high. The field uniformity is guaranteed over 75% of the surface (12 of the 16 points) of a vertical plane of 1.5 x 1.5 m high, 0.8 m from the ground. |
Example of actual NSA results in a TDK 3 meter test range ETSI semi-anechoic chamber (measured by ARC Seibersdorf).
Chamber Specifications Dimensions: 13.0 m long x 8.0 m wide x 6.0 m high Absorbers: Fully lined ferrite IB-015, Fully lined absorber IP-045C NSA test volume ±4 dB (@3 m): 3.0 m Ø, 2.5 m high Free space NSA test volume ±4 dB (@3 m): 2.0 m Ø, 2.0 m high Field uniformity area (-0, +6 dB): 1.5 x 1.5 m, 0.8 m from the floor Free space radiated emissions: Compliance with ETSI standards Radiated emissions: Compliance with ANSI C63.4, EN 50147-2, CISPR 22 Radiated immunity: Compliance with IEC 1000-4-3 EMI frequency range: 30 MHz - 18 GHz EMS frequency range: 26 MHz - 18 GHz
To place an order or to learn more about the Anechoic Chamber products that best meet your needs, contact your TDK sales representative: TDK Electronics UK Consort House Specifications subject to change without notice. |
